Huawei ATN 950B - Front Panel

l 1.2 V
5.2.4 Front Panel
On the front panel of the AND1EM8T, there are indicators and interfaces.
Appearance of the Front Panel
Figure 5-4 shows the appearance of the front panel of the AND1EM8T.
Figure 5-4 Front panel of the AND1EM8T
Indicator
The following indicators are present on the front panel of the AND1EM8T:
l STAT indicator, red, green, or orange, which indicates the working status
l LINK indicator, green, which indicates the connection status of the port
l ACT indicator, yellow, which indicates the data transceiving status of the port
NOTE
Above each service interface, there is a service port connection status indicator (LINK) and a service port
transmit/receive status indicator (ACT).
For details on meanings of indicators, see 11 Indicators.
Interface
Table 5-6 lists the types and usage of the interfaces on the AND1EM8T.
Table 5-6 Types and usage of the interfaces on the AND1EM8T
Interfac
e on the
Front
Panel
Interfac
e Type
Usage Pin Corresponding
Cable
FE/GE0
to FE/
GE7
RJ45 FE/GE auto-sensing
electrical interface
Refer to Table 5-7. Refer to 9.4.1
Ethernet Cables.
ATN 950B Multi-service Access Equipment
Hardware Description 5 Physical Interface Card
Issue 03 (2012-07-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43