Huawei ATN 950B - Technical Specifications

Table 5-14 Types and usage of the interfaces on the AND1EM8F
Interface on the Front
Panel
Interface
Type
Usage Correspo
nding
Cable
Fiber
Optical
interface
IN0 to IN7 LC When a two-fiber bidirectional
optical module is used, this
interface is used as an input
interface for the GE optical signal.
When a single-fiber bidirectional
optical module is used, this
interface is not used.
Refer to 9.5
Fibers.
OUT0 to
OUT7
LC When a two-fiber bidirectional
optical module is used, this
interface is used as an output
interface for the GE/FE optical
signal.
When a single-fiber bidirectional
optical module is used, this
interface is used as an input/output
interface for the GE/FE optical
signal.
5.4.5 Technical Specifications
Technical specifications of the AND1EM8F board include interface specifications and physical
specifications.
Interface Specifications
Table 5-15 and Table 5-16 lists the specifications of the interfaces on the AND1EM8F board.
Table 5-15 Technical specifications of the GE optical interface
Item
Specification
Optical
interface
type
Two-fiber bidirectional interface Single-fiber bidirectional interface
1000BAS
E-SX
(0.5 km)
1000BAS
E-LX
(10 km)
1000BAS
E-VX
(40 km)
1000BAS
E-ZX
(80 km)
1000BAS
E-BX10-
U
(10 km)
1000BAS
E-BX10-
D
(10 km)
1000BAS
E-BX40-
U
(40 km)
1000BAS
E-BX40-
D
(40 km)
Fiber type Multi-
mode
Single-
mode
Single-
mode
Single-
mode
Single-
mode
Single-
mode
Single-
mode
Single-
mode
ATN 950B Multi-service Access Equipment
Hardware Description 5 Physical Interface Card
Issue 03 (2012-07-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
54