Huawei ATN 950B - Fiber Connectors

Table 9-19 Types of Fiber
Usage Connect
or 1
Connect
or 2
Fiber Available Length
To interconnect
optical interfaces on
the equipment
LC/PC LC/PC 2 mm single-
mode fiber
0.5 m, 1.5 m, 3 m, 6 m, 10
m, 15 m, 20 m, 30 m
1.64 ft.,4.92.,9.84 ft.,19.68
ft.,32.81 ft.,49.21 ft.,65.61
ft.,98.42 ft.
2 mm multi-
mode fiber
3 m, 5 m, 10 m, 20 m, 30 m
9.84 ft..16.40 ft.,32.81 ft.,
65.62 ft.,98.42 ft.
To interconnect the
local equipment with
the ODF
To interconnect the
local equipment with
other equipment
LC/PC
FC/PC 2 mm single-
mode fiber
0.8 m, 2.7 m, 5 m, 7 m, 10
m, 15 m, 20 m, 25 m, 30 m,
50 m
2.62 ft.,8.86 ft.,16.40 ft.,
22.97 ft.,32.81 ft.,49.21 ft.,
65.62 ft.,82.02 ft.,98.42 ft.,
164.04 ft.
2 mm multi-
mode fiber
10 m, 20 m, 30 m
32.81 ft.,65.62 ft.,98.42 ft.
LC/PC SC/PC 2 mm single-
mode fiber
3 m, 5 m, 10 m, 15 m, 20 m,
25 m, 30 m, 50 m
9.84 ft..16.40 ft.,32.81 ft.,
49.21 ft.,65.62 ft.,82.02 ft.,
98.42 ft.,164.04 ft.
2 mm multi-
mode fiber
10 m, 20 m
32.81 ft.,65.62 ft.
Select proper fiber connectors and fibers of proper length according to the site survey.
9.5.2 Fiber Connectors
The fiber connectors of the LC/PC, FC/PC, and SC/PC types are applicable to the ATN 950B.
Table 9-20 lists the types and usage of the fiber connectors applicable to the equipment.
Table 9-20 Usage and types of fiber connectors
Type
Description Usage
LC/PC Plug-in square fiber connector/
protruding polished
Used at the optical interfaces on all the
boards on the equipment
FC/PC Round fiber connector/protruding
polished
Used at the client-side ODF or the optical
interfaces on other equipment
ATN 950B Multi-service Access Equipment
Hardware Description 9 Cables
Issue 03 (2012-07-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
109