Huawei ATN 950B - Page 119

Type Description Usage
SC/PC Square fiber connector/protruding
polished
LC/PC Fiber Connector
Figure 9-18 shows the appearance of the LC/PC fiber connector.
Figure 9-18 LC/PC fiber connector
Only axial operations instead of rotation is required to insert or remove the LC/PC fiber
connector. To insert or remove an LC/PC fiber connector, do as follows:
l To insert the fiber jumper into the LC/PC connector, align the head of the fiber jumper with
the optical interface and then push the fiber jumper with proper force into the connector.
l To remove the LC/PC fiber jumper, press the clip first, push the fiber connector inward
slightly, and then pull out the connector.
FC/PC Fiber Connector
Figure 9-19 shows the appearance of the FC/PC fiber connector.
Figure 9-19 FC/PC fiber connector
To insert or remove an FC/PC fiber connector, do as follows:
ATN 950B Multi-service Access Equipment
Hardware Description 9 Cables
Issue 03 (2012-07-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
110