Huawei ATN 950B - Front Panel; Technical Specifications

5.5.4 Front Panel
On the front panel of the AND1EX1, there are indicators and an interface.
Appearance of the Front Panel
Figure 5-10 shows the appearance of the front panel of the AND1EX1.
Figure 5-10 Front panel of the AND1EX1
Indicator
The following indicators are present on the front panel of the AND1EX1:
l STAT indicator, red, green, or orange, which indicates the working status
l L/A indicators, green or orange, which indicate the port connection status and data transmit/
receive status
For details on meanings of indicators, see 11 Indicators.
Interface
One SFP interface is present on the AND1EX1. Table 5-18 lists the types and usage of the
interfaces on the AND1EX1.
Table 5-18 Types and usage of the interfaces on the AND1EX1
Interface on the Front
Panel
Interface
Type
Usage Correspo
nding
Fiber
Optical
interface
IN LC Input interface for the 10GE
optical signal
Refer to 9.5
Fibers.
OUT LC Output interface for the 10GE
optical signal
5.5.5 Technical Specifications
Technical specifications of the AND1EX1 board include interface specifications and physical
specifications.
Interface Specifications
Table 5-19 lists the specifications of the electrical interfaces on the AND1EX1 board.
ATN 950B Multi-service Access Equipment
Hardware Description 5 Physical Interface Card
Issue 03 (2012-07-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
59