Huawei ATN 950B - Page 128

Table 11-1 Start status indicator combination
SN Status Indicator
STAT PROG ACTC
ACTX
1 The system control board
is not powered on.
Off Off Off
2 The BIOS is being started. Off Green Off
3 The BIOS is started, and
guides and loads the board
software.
Off Blinking (green) Off
4 The upper-layer software
is being initialized.
Green Green Off
5 The upper-layer software
initialization is complete,
but the system control
board is not running.
Green Green Off
6 The system control board
is running.
Green Green Off/Green/
Blinking (green)
a
NOTE
a: When the system control board is running, the ACTC and ACTX indicators may be off, in green or
blinking (green). When services are normal, the indicator is green. For other statuses of the indicator, see
Description of the CXP Switching Status Indicator (ACTX) and Description of the CXP Control
Status Indicator (ACTC).
ATN 950B Multi-service Access Equipment
Hardware Description 11 Indicators
Issue 03 (2012-07-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
119