Huawei CX600-X2-M Series - Page 120

Panel Description
Table 4-34 describes the indicators on the4-Port Channelized STM-1c POS-SFP Physical
Interface Card(PIC) .
Table 4-34 Description of the indicators on the 4-Port Channelized STM-1c POS-SFP Physical
Interface Card(PIC)
Indicator Description
STAT If the indicator is steady green, it indicates that the 4-Port Channelized
STM-1c POS-SFP Physical Interface Card(PIC) works normally.
If the indicator is off, it indicates that the 4-Port Channelized STM-1c
POS-SFP Physical Interface Card(PIC) is not powered on or fails to be
registered.
If the indicator is steady red, it indicates that the hardware of the 4-Port
Channelized STM-1c POS-SFP Physical Interface Card(PIC)is faulty.
If the indicator is steady yellow, it indicates that logic is not loaded to
the 4-Port Channelized STM-1c POS-SFP Physical Interface Card
(PIC).
LINK/ACT
(green)
If the indicator is steady on, it indicates that the link is normal.
If the indicator blinks, it indicates that data is being transmitted.
If the indicator is off, it indicates that the link is Down.
Interface Attributes
Table 4-35 lists the interface attributes of the 4-Port Channelized STM-1c POS-SFP Physical
Interface Card(PIC).
Table 4-35 Interface attributes of the 4-Port Channelized STM-1c POS-SFP Physical Interface
Card(PIC)
Attribute Description
Connector type LC/PC
Optical interface
attribute
Determined by the selected SFP optical module (for attributes of the SFP
optical module, see Table 4-36)
Working mode Full duplex
Link protocol ML-PPP
Network protocols IP
HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description
4 Boards
Issue 03 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
110