Huawei E9000 - 8 Common Operations

8 Common Operations
8.1 Obtaining a Product SN
8.2 Using iMana 200 to Collect Information in Batches
8.3 Using iBMC to Collect Information in Batches
8.4 Using the MM910 WebUI to Collect Information in Batches (for Versions
Earlier Than U54 2.20)
8.5 Using the MM910 WebUI to Collect Information in Batches (for U54 2.20 or
Later)
8.6 Using the FusionDirector WebUI to Collection Information in Batches
8.7 Using the MM510 CLI to Collect Information (FusionServer Pro G5500)
8.8 Logging In to the iMana 200 WebUI
8.9 Logging In to the iBMC WebUI
8.10 Logging In to the Web Tools of the MX510
8.11 Logging In to the MM910 WebUI
8.12 Logging In to the FusionDirector WebUI
8.13 Logging In to the MM510 CLI
8.14 Logging In to the RMC CLI
8.15 Logging In to a Server Over a Network Port by Using PuTTY
8.16 Logging In to a Server Over a Serial Port by Using PuTTY
8.17 Logging In to a Compute Node, Passthrough Module, or Switch Module by
Using the SOL Function of the MM910
8.18 Logging In to a Compute Node, Passthrough Module, or Switch Module by
Using the SOL Function of the MM920/MM921
8.19 Using WinSCP to Transfer Files
8.20
Conguring an FTP Server
8.21 Using SFTP to Transfer Files
Huawei Servers
Troubleshooting 8 Common Operations
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 125