Huawei E9000 - Checking Indicators to Locate Faults

2488H V5, 5885H V5, 1288X V5, 2288X V5, 2288 C V5, Atlas 800 AI inference
server (model 3010), Atlas 800 AI training server (model 9010). Table 5-3
describes the status and meanings of the fault diagnosis LED. For details about the
position of the fault diagnosis LED on each server, see the server user guide.
Figure 5-1 shows the position of the fault diagnosis LED on an RH1288 V3 server.
For details about how to rectify the fault, see the corresponding alarm handling
manual.
Table 5-3 Error codes
Module Name Displayed
Information
Meaning Diagnosis
Procedure
Fault diagnosis
LED
--- The server is
operating
properly.
N/A
Error code A component
fault has
occurred.
For details about
error codes, see
"Error Code
Handling" in the
alarm handling
guide of
corresponding
server. For details
about alarm
handling guides,
see Table 5-2.
Figure 5-1 Position of the fault diagnosis LED
5.5 Checking Indicators to Locate Faults
For details about the positions of indicators, see the sections about the front and
rear panels in the user guide of the
specic server. To obtain the user guide of
each server, perform the following steps:
1. Visit Support > Intelligent Servers or Support > Ascend Computing.
2. Choose a server model to access the product page.
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 41