3. On the Documentation tab page, choose Operation & Maintenance > User
Guide.
4. View the required user guide.
Process
Figure 5-2 shows the process for checking the indicators.
Figure 5-2 Process for checking the indicators
Indicators Available on All Servers
Step 1 Observe the status indicators of the servers.
Table 5-4 Status indicators
Indicator
Status Meaning Diagnosis
Health status
indicator
Steady green The server is
operating
properly.
N/A
Blinking red A fault alarm is
generated.
1. Log in to the
iMana 200 or
iBMC WebUI to
view the alarm
information.
For details, see
"Basic
Operations" in
Huawei Servers
Troubleshooting 5 Diagnosing and Rectifying Faults
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 42
To Next Page
Loading...
