Huawei E9000 - Using Smartkit to Collect Switch Module Logs; Using the V5 Switch Module CLI to Collect Ethernet Switching Plane Information

Switc
hing
Plane
Type
Switch
Module
Type
Prerequis
ites
Log Collection Method Reference Link
8.10
Logging
In to the
Web
Tools of
the
MX510
Using the GUI 4.4.2.5 Using the
Web Tools Page
of a Switch
Module to
Collect FC
Switching Plane
Information
(MX510)
CX210,
CX220,
CX912,
and
CX916
switch
modules
4.4.1.1
Connecti
ng a PC
to the
Ethernet
Switchin
g Plane
Using the CLI 4.4.2.7 Using the
Switch Module
CLI to Collect FC
Switching Plane
Information
(MX210/MX220)
4.4.2.2 Using SmartKit to Collect Switch Module Logs
For details about how to use SmartKit to collect logs for the E9000 switch module,
see "Collecting Server Logs" in the FusionServer Tools 2.0 SmartKit User Guide .
4.4.2.3 Using the V5 Switch Module CLI to Collect Ethernet Switching Plane
Information
Operation Scenario
Use the E9000 server switch module CLI of the V5 platform to collect Ethernet
switching plane information, including:
● Logs
● Debugging information
● Trap information
For details about how to query the Ethernet switching plane version, see 4.4.1.2
Querying the Software Version of the Ethernet Switching Plane.
Prerequisites
Conditions
● WFTPD 4.2.4.610 or later has been installed on the PC.
● You have logged in to the Ethernet switching plane CLI. For details, see 8.15
Logging In to a Server Over a Network Port by Using PuTTY or 8.17
Logging In to a Compute Node, Passthrough Module, or Switch Module
by Using the SOL Function of the MM910.
Huawei Servers
Troubleshooting 4 Collecting Information
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 20