Huawei E9000 - Logging in to the Web Tools of the MX510

8.10 Logging In to the Web Tools of the MX510
Operation Scenario
Log in to the Web Tools of the FC switching plane MX510 by using a browser on
the local PC to
congure and manage this plane.
This section applies to the CX311, CX911, and CX915.
Data
The following data is required:
● IP address of the server to be connected
● User name for logging in to the server to be connected. The default username
is admin.
● User password for logging in to the server to be connected. The default user
password is Huawei12#$.
Tool
Java plug-in: This tool is third-party software. You need to prepare it by yourself.
JRE 1.8 or later is required.
Procedure
Step 1 Connect a client (for example, a local PC) to the management network port of the
management module by using a network cable.
Step 2 In this displayed security alert dialog box, click Allow to allow web access.
Step 3 In the displayed security alert dialog box, select Do not block this program.
Step 4 In the address box of the PC browser, enter https://
IP address of the FC switching
plane
and press Enter.
The login dialog box is displayed, as shown in Figure 8-25.
Huawei Servers
Troubleshooting 8 Common Operations
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 148