Huawei E9000 - Using the V8 Switch Module CLI to Collect Ethernet Switching Plane Information

<Fabric>ftp 200.1.1.126
Trying 200.1.1.126 ...
Press CTRL+K to abort
Connected to 200.1.1.126.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(200.1.1.126 none):root
331 Give me your password, please
Enter password:
230 Logged in successfull
[ftp]
NO TE
The IP address of the FTP server is congured by the user and is on the same network
segment as the management IP address of the switch module.
4. Convert the log le into a binary le for transfer.
[ftp]binary
5. Obtain the log
le.
[ftp]put ash:/diag-info.txt
200 PORT command okay
150 "F:\diag-info.txt" le ready to receive in IMAGE / Binary mode
226 Transfer
nished successfully.
FTP: 148848 byte(s) sent in 0.280 second(s) 531.60Kbyte(s)/sec.
[ftp]lcd ashVX:/logle
The current local directory is ashVX:/logle.
[ftp]mput *
Error: The le name . is invalid.
Error: The le name .. is invalid.
200 PORT command okay
150 "F:\log.dblg"
le ready to receive in IMAGE / Binary mode
226 Transfer nished successfully.
FTP: 1513938 byte(s) sent in 1.160 second(s) 1305.11Kbyte(s)/sec.
200 PORT command okay
150 "F:\log.log"
le ready to receive in IMAGE / Binary mode
226 Transfer nished successfully.
FTP: 2689148 byte(s) sent in 1.940 second(s) 1386.15Kbyte(s)/sec.
[ftp]quit
6. View the log
le in the FTP directory on the PC.
----End
4.4.2.4 Using the V8 Switch Module CLI to Collect Ethernet Switching Plane
Information
Operation Scenario
Use the CLI of an E9000 switch module to collect the following information about
the V8 platform:
● Logs
● Debugging information
● Trap information
For details about how to query the Ethernet switching plane version, see 4.4.1.2
Querying the Software Version of the Ethernet Switching Plane.
Huawei Servers
Troubleshooting 4 Collecting Information
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 23