Huawei E9000 - Logging in to the Imana 200 Webui

Example
# One-click information collection
iBMC:/->ipmcget -d diaginfo
Download diagnose info to /tmp/ successfully.
8.8 Logging In to the iMana 200 WebUI
Operation Scenario
This section describes how to log in to the iMana 200 WebUI by using a browser
on the local PC. This section uses a PC running Windows and Internet Explorer 8.0
as an example.
Prerequisites
Conditions
If the remote control function is required, ensure that the OS, browser, and Java
Runtime Environment (JRE) of the required versions have been installed on the
local PC. Table 8-2 shows the system
conguration requirements of the local PC.
Ensure that the local PC meets the following networking conditions:
● The local PC is properly connected to the iMana 200 management network
port on the server by using a network cable.
● The IP addresses of the local PC and the iMana 200 management network
port are on the same network segment.
Table 8-2 Local PC
conguration requirements
OS
Software Version
● Windows 7 32-
bit
● Windows 8 32-
bit
● Windows
Server 2008
32-bit
Browser Internet Explorer Internet Explorer 8.0/10.0
Mozilla Firefox Mozilla Firefox 9.0/23.0
Google Chrome Chrome 13.0/31.0
JRE 1.6.0 U25/1.7.0 U40 (32-
bit)
● Windows 7 64-
bit
● Windows 8 64-
bit
● Windows
Server 2008 R2
64-bit
● Windows
Server 2012
64-bit
Browser Internet Explorer Internet Explorer 8.0/10.0
Mozilla Firefox Mozilla Firefox 9.0/23.0
Google Chrome Chrome 13.0/31.0
JRE 1.6.0 U25/1.7.0 U40 (64-
bit)
Huawei Servers
Troubleshooting 8 Common Operations
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 140