In this document, PuTTY is used as the SSH tool. For details, see 8.15 Logging In
to a Server Over a Network Port by Using PuTTY.
Step 2 Run the ipmcget -l blade
N
-t SOL -d cominfo or ipmcget -l swi
N
-t SOL -d
cominfo command to query the SOL port information of the compute node, pass
through module, or switch module.
Step 3 Run the ipmcset -l blade
N
-t sol -d activate -v com_value or ipmcset -l swi
N
-t
sol -d activate -v com_value command to enter the serial port input interface.
Step 4 Enter the username and password as prompted.
----End
8.19 Using WinSCP to Transfer Files
Scenarios
Use WinSCP to transfer
les from a PC to a server.
Prerequisites
Conditions
The Secure File Transfer Protocol (SFTP) service has been enabled on the
destination device.
Data
You have obtained the following data:
● You have obtained the IP address of the server to be connected.
● You have obtained the user name and password for logging in to the server to
be connected.
Software Tools
WinSCP.exe: This tool is third-party software. You need to prepare it by yourself.
Procedure
Step 1 Open the WinSCP folder, and double-click WinSCP.exe.
The WinSCP Login dialog box is displayed, as shown in Figure 8-41.
To change the UI language, click Languages.
Huawei Servers
Troubleshooting 8 Common Operations
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 171
To Next Page
Loading...
