Huawei E9000 - Page 28

Switc
hing
Plane
Type
Switch
Module
Type
Prerequis
ites
Log Collection Method Reference Link
Ethern
et
switchi
ng
plane
V5 switch
modules
4.4.1.1
Connecti
ng a PC
to the
Ethernet
Switchin
g Plane
● Using the CLI
● Using the WebUI
NOTE
The prerequisites for using
the one-click full collection
function of the MM910
WebUI to collect switching
plane logs are as follows:
● The MM910 software
version is 6.00 or later.
● The switching plane
software version is 5.30
or later.
● Using the CLI
4.4.2.3 Using
the V5 Switch
Module CLI to
Collect
Ethernet
Switching
Plane
Information
● WebUI
8.5 Using the
MM910
WebUI to
Collect
Information
in Batches
(for U54 2.20
or Later)
V8 switch
modules
● Using the CLI
4.4.2.4 Using
the V8 Switch
Module CLI to
Collect
Ethernet
Switching
Plane
Information
● WebUI
8.5 Using the
MM910
WebUI to
Collect
Information
in Batches
(for U54 2.20
or Later)
FC
switchi
ng
plane
CX311,
CX911,
and
CX915
switch
modules
4.4.1.1
Connecti
ng a PC
to the
Ethernet
Switchin
g Plane
Using the CLI 4.4.2.6 Using the
Switch Module
CLI to Collect FC
Switching Plane
Information
(MX510)
Huawei Servers
Troubleshooting 4 Collecting Information
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. 19