Huawei E9000 - Page 5

Issue Date Description
13 2019-01-08 This is the thirteenth ocial release.
12 2018-07-13 This is the twelfth ocial release.
11 2018-05-18 This is the eleventh ocial release.
Added description about the FusionServer
G2500 heterogeneous server.
10 2018-03-12 This issue is the tenth ocial release.
Added information about the
FusionServer Pro G5500 server.
09 2017-12-14 This issue is the ninth ocial release.
Added description about the CX916
switch module of the E9000 server.
08 2017-08-08 This issue is the eighth ocial release.
Modied 4.4.1.1 Connecting a PC to the
Ethernet Switching Plane.
07 2017-07-20 This issue is the seventh ocial release.
Modied 4.4.2.1 Collection Method.
06 2017-04-18 This issue is the sixth ocial release.
Added description that faulty E9000
compute nodes cannot be reseated in 5.5
Checking Indicators to Locate Faults.
05 2016-10-27 This issue is the fth ocial release.
Added the quick recovery method for
E9000 switch modules in 5.6 Handling
Faults Based on Symptoms.
04 2016-07-11 This issue is the fourth ocial release.
● Modied 4.4.2.7 Using the Switch
Module CLI to Collect FC Switching
Plane Information (MX210/MX220).
● Added the quick recovery method in
5.6 Handling Faults Based on
Symptoms.
03 2016-05-10 This issue is the third ocial release.
● Deleted the "Using the Web Tools of a
Switch Module to Collect Information
About an FC Switching Plane (NX120/
NX220/MX210/MX220)" section.
●
Modied 4.4.2.4 Using the V8 Switch
Module CLI to Collect Ethernet
Switching Plane Information.
● Added 9 Other Resources.
Huawei Servers
Troubleshooting About This Document
Issue 20 (2020-09-25) Copyright © Huawei Technologies Co., Ltd. iv