Huawei FusionDC1000A - About This Document; Purpose; Intended Audience; Symbol Conventions

About This Document
Purpose
This document describes how to power on and commission the FusionDC1000A
prefabricated all-in-one data center solution (FusionDC1000 for short) in terms of
safety precautions, preparations, power-on check, power-on commissioning, joint
commissioning,
power-o, and core device commissioning. It provides you a quick
grasp of how to commission the prefabricated all-in-one data center.
Intended Audience
This document is intended for:
● Hardware installation engineers
● Technical support engineers
● Commissioning engineers
● Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are
dened as follows.
Symbol
Description
Indicates a hazard with a high level of risk which,
if not avoided, will result in death or serious
injury.
Indicates a hazard with a medium level of risk
which, if not avoided, could result in death or
serious injury.
Indicates a hazard with a low level of risk which,
if not avoided, could result in minor or moderate
injury.
FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario) About This Document
Issue 02 (2022-12-15) Copyright © Huawei Digital Power Technologies Co., Ltd. ii