Huawei FusionDC1000A - Setting and Adding the ECC800 Collector

To Next Page

To Previous Page

Interface Introduction

Figure 4-12 Adding a device

Table 4-9 Description of the page for adding a device

Area

Operation

(1)

Management

domain

navigation tree

In the management domain navigation tree, select the

management domain to which the device to be added

belongs.

(2) Device

selection area

Click the Device tab, select a device type from the drop-down

list box, and click the device to be added.

(3)

Management

domain

Drag the selected device to the management domain.

(4) Device Click the device. The parameter setting area is displayed in the

right pane.

(5) Parameter

setting area

Set device parameters in the parameter setting area.

(6) Save Click Save. The device is added.

4.7.3 Setting and Adding the ECC800 Collector

The requirements for ECC800 WebUI login are as follows.

Computer operating system: Windows 7 or later supported

Browser: Chrome, Firefox, Internet Explorer 11 or later

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) 4 Commissioning Core Devices

Other manuals for Huawei FusionDC1000A