Huawei FusionDC1000A

To Next Page

To Previous Page

4.1.2.2 Starting the Inverter

UPS System User List

Table 4-1 UPS system user list

Default User Preset Password Permission Description

admin (administrator) 000001 Can set all the menus.

operator (common user) 000001 Can only view

parameters and set some

parameters.

Starting the Inverter on the LCD

Step 1 Choose Common Functions > Inv. ON.

NO TE

You can also start the inverter by choosing System Info > Maintenance > Inv. ON.

Step 2 In the displayed login screen, select a user name and enter the password.

Step 3 In the displayed dialog box, tap Yes to start the inverter.

----End

4.1.2.3 Powering On Loads

After the inverter starts, the UPS works in normal mode. The Bypass mode alarm

disappears. Check that the UPS has transferred to normal mode by viewing the

system running status diagram.

Procedure

Step 1 After conrming that the battery strings are properly connected, turn on the

battery string input switch. If there are multiple battery strings, turn on the switch

for each battery string and then the general switch between battery strings and

the UPS. After you turn on the battery string input switch, the No battery alarm

disappears.

Step 2 Turn on the UPS output circuit breaker QF3.

NO TICE

After the UPS is started for the rst time, perform a battery capacity test to ensure

that battery parameters are correctly displayed.

Step 3 (Optional) Turn on the lighting output circuit breaker on the integrated UPS and

check whether the PWR indicator on the AC actuator lights up. Press down the

lighting button to power on the light.

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) 4 Commissioning Core Devices

Huawei FusionDC1000A - rPDU