Huawei FusionDC1000A - How Can I Set and Add a Smartli (Modbus-TCP)

Context
The management domains include Park, Building, Room, ContainerDC, Subnet,
NetecoSite, FusionModule500, Modular, Room-ShapeNode, and Building-
ShapeNode. You are advised to plan the subordinate relationship between
domains and devices before performing operations.
The NetEco is precongured with management domains such as cabinets, battery
cabinets, buildings, containers, oors, FusionModule500, smart modules, NetEco
sites, parks, PDCs, equipment rooms, and subnets. To use more management
domains, you need to install the corresponding adapter software package on the
NetEco.
Procedure
Step 1 Choose System > Service Settings > Data Center Planning from the main menu.
The Data Center Planning page is displayed.
Step 2 Add a management domain.
1. In the navigation tree, choose the upper-level node where you want to add a
management domain.
2. In the Domain area which is below the navigation tree, drag a management
domain icon to the required position in the view.
NO TE
You can adjust the shape of Room, Room–ShapeNode, Building–ShapeNode, Floor–
ShapeNode, Container–ShapeNode, and NetecoSite by: Holding down the Shift key
and the left mouse button and then clicking on the corresponding frame lines can
increase the small yellow dot. You can drag the small yellow dot to adjust the shape
of the managed domain icon.
To delete a domain, click the domain icon and select Delete under
.
3. In the right side of the view area, set Management Info. Set parameters as
required. The parameter marked with an asterisk (*) is mandatory.
NO TE
You can congure Management Info, Electricity Info, and Refrigeration Info for the
equipment room management domain.
4. Click on the toolbar.
Repeat steps Step 2.1 to Step 2.4 until the conguration is complete.
Step 3 Click on the toolbar.
----End
4.7.2.7 How Can I Set and Add a SmartLi (Modbus-TCP)?
Prerequisites
One end of the straight-through cable has been connected to the FE port on the
SmartLi and the other end has been connected to the PoE port on the smart ETH
gateway.
FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario) 4 Commissioning Core Devices
Issue 02 (2022-12-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 58