Huawei FusionDC1000A - Setting the Transparent Transmission Function for the ECC800-Pro Collector

Table 4-12 Setting an authentication password
Path Parameter Default
Value
Setting
System
Settings >
NMS
Application
> NetEco >
Set
Authenticati
on Password
Authenticatio
n password
Modifyme
_123
Set this parameter based on
customer requirements.
NOTE
Requirements for setting passwords:
'a~z','A~Z','0~9','~!@#^*_={}:,./?-`
$'(8-32 characters that include at least
three of the following types: lowercase
letters, uppercase letters, digits, and
special characters)
Conrm
authenticatio
n password
- -
Step 5 Click Submit.
----End
4.7.3.2 Setting the Transparent Transmission Function for the ECC800-Pro
Collector
Context
● Using the transparent transmission function, the NMS can directly manage
southbound components that are not monitored by the ECC800-Pro.
● A device connected to the COM port on the ECC800-Pro or UIM20A expansion
module can be connected to the NetEco using the transparent transmission
function.
● In this example, the COM2 port of the ECC800-Pro is used for transparent
transmission.
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose System Settings > NMS Application > Transparent Transmission
Channel.
Step 3 Set COM2(Port:3212) to Enable and click Submit.
NO TE
Mapping relationship: COM1 corresponds to port 3211, COM2 port 3212, COM3 port 3213, and
COM4 port 3214.
● If the port is set for the rst time, you are prompted to set an authentication
password. On the Set Authentication Password tab page, set
Authentication password and
Conrm authentication password and click
Submit.
FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario) 4 Commissioning Core Devices
Issue 02 (2022-12-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 62