Huawei FusionDC1000A - Process of Adding a Device

To Next Page

To Previous Page

Procedure

Step 1 Set SmartLi monitoring parameters.

1. On the home screen of the SmartLi, tap System Info.

2. Choose System Info > Settings, enter the user name admin and password

000001, and tap .

3. Tap Communication to set IP address assign to Automatic(DHCP) on the

displayed communication settings screen and the SmartLi is discovered by

ECC800-Pro automatically and is connected to the ECC800-Pro.

4. After the ECC800-Pro is directly

identied and connected, set the lithium

battery view on the ECC800-Pro WebUI.

5. Drag Lithium Battery Cabinet1 to the gray area to the right of the UPS.

Figure 4-11

Conguring the lithium battery cabinet

----End

4.7.2.8 Process of adding a device

Prerequisites

● You have logged in to the NetEco client using a web browser.

● You have the operation rights for Data Center Planning.

FusionDC1000A Prefabricated All-in-One Data

Center

Commissioning Guide (IT Scenario) 4 Commissioning Core Devices

Other manuals for Huawei FusionDC1000A