Huawei FusionModule500 Smart User Manual

● A PC with an IP address in the same network segment as that of the ECC800-
Pro is prepared, and the PC has connected to port WAN_1 on the ECC800-Pro.
Procedure
Step 1 Download and install the FusionModule app from Huawei AppGallery.
NO TE
Before the installation, ensure that the PAD has connected to the Internet and the network
is running properly.
● Huawei AppGallery installed on the PAD
Log in to the Huawei AppGallery client, search for FusionModule, and tap
Install. Huawei AppGallery is preinstalled on Huawei PAD by default.
● Huawei AppGallery not installed on the PAD
Table 5-4 Operation methods for the scenario where Huawei AppGallery is
not installed on the PAD
Method Procedure Installation
Verication
Method 1: Install the
app from the
Huawei AppGallery
ocial website.
1. Log in to Huawei
AppGallery (https://
appgallery.huawei.co
m/), search for
FusionModule, and tap
Install.
2. In the displayed Tip
dialog box, tap Install
AppGallery.
3. The Huawei AppGallery
installation
le is
displayed on the
screen. Download and
install the Huawei
AppGallery as
prompted.
4. On the Huawei
AppGallery client,
search for
FusionModule, and tap
Install.
Check that the app icon
exists on the
PAD desktop.
FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S) 5 Power-On Commissioning
Issue 02 (2021-06-30) Copyright © Huawei Technologies Co., Ltd. 113

Huawei FusionModule500 Smart Specifications

General

Brand	Huawei
Model	FusionModule500 Smart
Category	Storage
Language	English