Function Path Operation
Open
cabinet
electroni
c clasp
locks in
batches
Choose Monitoring > Cabinet
and click the Controls tab.
Select Open front door or Open
back door from the Open the
door drop-down list box, select
the setting, and click Submit.
The cabinet electronic clasp locks
unlock the doors in batches
based on the signal value.
a: Cabinet electronic clasp lock 1 is used as an example.
Step 6 When closing the door, rotate the lock handle vertically downward. If the door
cannot be opened or closed properly, locate the fault.
1. Check whether there is friction between the lock tongue and the cabinet
electronic clasp lock. If so, adjust the installation position of the clasp lock.
Figure 5-8 Adjusting the position of a clasp lock
2. Check whether there is interference between the lock tongue and the cabinet
column. If so, adjust the installation position of the lock tongue.
Figure 5-9 Adjusting the position of a lock tongue
3. Check whether there is interference between the castors and the door sill at
the bottom of the cabinet. If so, remove the fasteners that secure the castors.
FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S) 5 Power-On Commissioning
Issue 02 (2021-06-30) Copyright © Huawei Technologies Co., Ltd. 126
To Next Page
Loading...
Need help?
General