Figure 8-45 Installing a memory module
Step 8 Install the air duct.
For details, see 8.4.24 Installing the Air Duct.
Step 9 Install the server node.
For details, see 8.3.4 Installing an XH321 V5.
Step 10 Power on the server node.
For details, see 8.3.1 Power-On Procedure.
Step 11 Log in to the iBMC WebUI, and check whether the new component is normal.
For details, see
FusionServer Pro X6000 Server iBMC User Guide
.
● If information about the new memory module is displayed, the replacement is
successful.
● If information about the original memory module is displayed, access the BIOS and
check memory information.
For details, see
Huawei Server Purley Platform BIOS Parameter Reference
.
----End
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 8 Parts Replacement
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 78
To Next Page
Loading...
