Figure 8-8 Setting EMI parameters
5. Click Setting > Battery control to set the battery working mode.
Figure 8-9 Working modes
Working Mode Description
No control SmartLogger directly delivers the external
scheduling power limit. No other power
scheduling control is performed. The power is
automatically controlled by the device.
Maximum self-
consumption
– This mode applies to areas where the
electricity price is high, or areas where the
FIT subsidy is low or unavailable.
– Excess PV energy is stored in batteries. When
PV power is insucient or no PV power is
generated at night, batteries discharge to
supply power to the loads, improving the
self-consumption rate of the PV system and
the
self-suciency rate of residential energy,
and reducing electricity costs.
– The SmartLogger performs battery
scheduling based on the external scheduling
power limit and the preceding policies.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 8 SmartLogger Web-based Deployment
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 123
To Next Page
Loading...