Huawei LUNA2000-97KWH-1H1 - Page 178

Table B-1 Paint repair description
Paint Damage Tool and
Material
Procedure Description
Slight scratch
(steel base
material not
exposed)
Spray paint or
paint, brush
(required for
repainting a small
area), ne
sandpaper,
anhydrous
alcohol, cotton
cloth, and paint
spray gun
(required for
repainting a large
area)
Steps 1, 2, 4, and
5
1. For the color of
the nish coat
(acrylic acid
paint), see the
delivered color
palette and
Pantone
number
specied on it.
2. For a few
scratches,
smudges, or
rust, manual
paint spraying
or brushing is
recommended.
3. For many
scratches or
large-area
smudges and
rusts, use a
paint spray
gun.
4. The paint
coating should
be thin and
even. Paint
drops are
prohibited on
the coating.
The surface
should be
smooth.
5. Leave the
repainted area
for
approximately
30 minutes
before
performing any
further
operation.
Smudges and rust
that cannot be
removed
Deep scratch
(primer damaged,
steel base
material exposed)
Spray paint or
paint, zinc-rich
primer, brush
(required for
repainting a small
area), ne
sandpaper,
anhydrous
alcohol, cotton
cloth, paint spray
gun (required for
repainting a large
area)
Steps 1, 2, 3, 4,
and 5
Logo and pattern
damage
If a logo or pattern is damaged,
provide the logo size and color
number. Seek help from a local
supplier of advertisement coatings to
formulate a repair solution based on
the logo size, color, and damage.
Dent 1. If a dent is less than or equal to
100 mm
2
in area and less than 3
mm in depth, ll the dent with
Poly-Putty base and then perform
the same operations as those for
processing deep scratches.
2. If a dent is greater than 100 mm
2
in
area or greater than 3 mm in
depth, ask the local supplier for an
appropriate repainting solution.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual B How Do I Repair Paint Damage?
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 168