Huawei LUNA2000-97KWH-1H1

To Next Page

To Previous Page

Procedure

Step 1 Gently polish damaged areas using ne sandpaper to remove smudges or rust.

Figure B-1 Polishing a damaged area using sandpaper

Step 2 Dip a piece of cotton cloth into anhydrous alcohol and wipe the polished or

damaged area to remove the dirt and dust. Then wipe o the anhydrous alcohol

with a clean and dry cotton cloth

Figure B-2 Wiping a polished or damaged area using anhydrous alcohol

Step 3 Paint zinc-rich primer on the damaged coat using a brush or paint spray gun.

NO TICE

● If the base material is exposed in the area to be repaired, apply epoxy zinc-rich

primer, wait until the paint has dried, and then apply acrylic acid top coat.

● Select epoxy zinc-rich primer or acrylic acid top coat with a color the same as

the surface coating color of the equipment.

Step 4 Apply paint evenly to the damaged area based on the damage degree of the paint

using an aerosol spray, brush, or paint spray gun until all damage traces are

invisible.

LUNA2000-(97KWH-1H1, 129KWH-2H1,

161KWH-2H1, 200KWH-2H1) Smart String ESS

User Manual B How Do I Repair Paint Damage?

Huawei LUNA2000-97KWH-1H1 - Page 179