Huawei OceanStor V5 Series - Page 167

Figure 7-25 Installing the cover of a system subrack
4. Fasten the two screws on the panel, as shown in Figure 7-26.
Figure 7-26 Fastening screws on the panel
5. Verify that the system subrack is horizontally installed.
6. Install all the components into the newly installed system subrack.
NO TICE
Install all components in the same slots as in the removed system subrack.
Otherwise, system services may be
aected.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 158