Figure 7-23 Fastening screws on the inner guide rails
Step 8 Install the system subrack into the cabinet.
1. Slide the system subrack into the cabinet along guide rails.
2. Loosen the two screws on the panel and slowly pull out the enclosure, as
shown in Figure 7-24.
Figure 7-24 Pulling out an enclosure
3. Fasten the two screws on the cover and slowly slide the enclosure into the
cabinet, as shown in Figure 7-25.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 157
To Next Page
Loading...
