2. Remove the inner guide rails from the system subrack that you want to
replace, as shown in Figure 7-21.
Figure 7-21 Removing inner guide rails
3. Install the inner guide rails to the spare part, as shown in Figure 7-22.
Figure 7-22 Installing inner guide rails
4. Use the Phillips screwdriver to fasten the four screws on the inner guide rails,
as shown in Figure 7-23.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 156
To Next Page
Loading...
