Figure 7-19 Removing a system subrack
Step 7 Uninstall the inner guide rails on the system subrack that you want to replace and
reinstall them to the same positions on the spare part.
1. Use the Phillips screwdriver to loosen the four screws on the inner guide rails,
as shown in Figure 7-20.
Figure 7-20 Loosening screws on the inner guide rails
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 155
To Next Page
Loading...
