Huawei OceanStor V5 Series

To Next Page

To Previous Page

Figure 7-31 Removing a system subrack

Step 6 Optional: Attach the nameplate, Huawei logo label, product model label, and

Intel label to the same positions on the spare part as those on the removed

system subrack, as shown in Figure 7-32. a indicates the position of the

nameplate, b indicates the position of the Huawei logo label, and c indicates the

position of the product model label and Intel label.

Figure 7-32 Positions of the nameplate, Huawei logo label, product model label,

and Intel label

● Two dierent nameplates are often included upon the product delivery. Select the one

that contains identical information to the nameplate on the removed system subrack.

● When attaching the product model label and Intel label, attach the product model label

rst and then attach the Intel label under the information on the product model label.

Step 7 Optional: Pull the information plate out of the system subrack. (If you face the

front part of the system subrack, the information plate is located at the upper

right of the enclosure, as shown in Figure 7-33. Gently pull the information plate,

OceanStor V5 Series

Parts Replacement 7 Replacing FRUs

Huawei OceanStor V5 Series - Page 176