Figure 7-45 Removing an interface module
4. Put the removed interface module into an ESD bag.
Step 4 Remove the cables from the controller.
Step 5 Press latches on the controller to release the handles and pull out the controller,
as shown in Figure 7-46.
Figure 7-46 Removing a controller
Step 6 Place the removed controller into an ESD bag.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 183
To Next Page
Loading...
