Step 7 Take the spare part out of its ESD bag.
Step 8 Open handles on the spare part, insert the spare part, and close the handles, as
shown in Figure 7-47.
Figure 7-47 Installing a controller
Step 9 Insert the removed interface modules to the empty slots until they click into place,
as shown in Figure 7-48.
Figure 7-48 Installing an interface module
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 184
To Next Page
Loading...
