Figure 7-93 Installing a management module
Step 8 Connect the cables.
Step 9 Wait about two minutes and check the status of the Power indicator on the
management module to determine whether the management module has been
successfully installed. Figure 7-94 shows the location of the Power indicator.
● If the indicator is steady green, the management module has been
successfully installed.
● If the indicator is steady red or
o, the newly installed management module
is faulty, the management module slot is faulty, or the management module
is incorrectly installed.
Figure 7-94 Power indicator on a management module
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 243
To Next Page
Loading...
