Figure 7-101 Removing a power module
4. Place the removed power module in an ESD bag.
Step 3 Install the AC power module.
1. Take the spare part out of its ESD bag.
2. Push the spare part along the guide rails into a slot until you hear a click.
Spare part spring snaps into the latch so that the spare part does not move.
See Figure 7-102.
Figure 7-102 Installing an AC power module
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 250
To Next Page
Loading...
