Figure 6-63 Running/Alarm indicator on a BBU
You can perform replacement only when a redundant BBU exists and the
redundant BBU is working properly.
Step 2 Wear an ESD wrist strap.
Step 3 Press the latch on the power module to release the handle and pull out the power
module, as shown in Figure 6-64.
Figure 6-64 Removing a power module
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 69
To Next Page
Loading...
