Step 4 Press the latch on the BBU and pull the BBU out of the removed power module, as
shown in Figure 6-65.
Figure 6-65 Removing a BBU
Step 5 Place the removed BBU into an ESD bag.
Step 6 Take the spare part out of its ESD bag.
Step 7 Insert the spare part into the empty slot until it clicks into place, as shown in
Figure 6-66.
Figure 6-66 Installing a BBU
Step 8 Open the handle of the removed power module, insert the power module into the
empty slot, and close the handle, as shown in Figure 6-67.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 70
To Next Page
Loading...
