Figure 6-79 Installing a fan module
Step 7 Wait approximately two minutes and check the status of the Running/Alarm
indicator on the fan module to determine whether the fan module has been
successfully installed. Figure 6-80 shows the location of the Running/Alarm
indicator.
● If the indicator is steady green, the fan module has been successfully installed.
● If the indicator is steady red or
o, the newly installed fan module is faulty,
the fan module slot is faulty, or the fan module is incorrectly installed.
Figure 6-80 Running/Alarm indicator on a fan module
Step 8 If the fan module has been successfully installed, close the panel, as shown in
Figure 6-81.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 83
To Next Page
Loading...
