Huawei PDU8000 - Page 104

Figure 7-41 Access Control
Table 7-3 Access Control
Item Description Default
Value
Value Range
SSH Refers to a secure encrypted
transmission protocol used to
access the UPS with a terminal
tool.
Disable: The SSH port is
disabled and cannot be
accessed.
Enable: The SSH port is
enabled and can be accessed.
Enable Disable,
Enable
ModbusTCP Refers to an Ethernet-based
Modbus protocol used to
connect to the NetEco.
Disable: The Modbus TCP
services are unavailable.
Enable: All functions are
available.
Enable Disable,
Enable
SNMP Refers to the Simple Network
Management Protocol used to
connect to the NetEco.
Disable: The SNMP services
are unavailable.
Enable: All functions are
available.
Enable Disable,
Enable
PDU8000 Modular Precision PDC V2.0
User Manual 7 MDU Commissioning Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 97