2.5 Laying Out Cables
Binding Signal Cables
Signal cables must be bound separately from strong-current cables and high-
voltage cables.
Laying Out Power Cables
When the temperature is very low, violent impact or vibration may damage the
power cable sheathing. To ensure safety, comply with the following requirements:
● Power cables should be laid out or installed only when the temperature is
higher than 0°C.
● Store power cables for at least 24 hours at room temperature before laying
out them if they were previously stored at sub-0ºC.
● Handle power cables with caution, especially at a low temperature. Do not
drop the power cables directly from the vehicle.
PDU8000 Modular Precision PDC V2.0
User Manual 2 Safety Precautions
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 5
To Next Page
Loading...
