Huawei PDU8000 - System Parameter Settings

Set a subnet mask for the Ethernet. The value ranges from 0.0.0.0 to
255.255.255.255. The default value is 255.255.255.0.
● Gateway
Set an Ethernet gateway. The value ranges from 0.0.0.0 to 255.255.255.255. The
default value is 192.168.0.1.
● Serial port baud rate
Set the serial port communications rate. The value options include 4800, 9600,
and 19200. The default value is 9600.
● Serial port address
Set the serial port communications address. The value ranges from 0 to 254. The
default value is 1.
● SSL
Indicates whether Modbus-TCP supports encryption transmission. The default
value is Enable.
●
ModbusTCPcertication
Sets the secondary authentication for NMS access. The default value is Disable.
● SNMP Conguration
Set SNMP related parameters.
7.4.3.3 System Parameter Settings
On the Settings screen, tap System Param. to access the screen.
Figure 7-32 System Param. 1
PDU8000 Modular Precision PDC V2.0
User Manual 7 MDU Commissioning Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 90