● Total Active Power (kW)
Indicates the sum of active power of all phases of the mains input.
● Tot. energy (kWh)
Indicates the sum of electricity energy of all phases of the mains input.
● Tot. apparent pwr. (kVA)
Indicates the sum of apparent power of all phases of the mains input.
● Tot. reactive pwr. (kVAR)
Indicates the sum of reactive power of all phases of the mains input.
● Temp (°C)
Indicates the mains temperature.
7.4.1.2 Branch Output 1/2
On the Running screen, tap Branch Output 1 to view the detailed parameters of
Branch Output 1.
For the information about the Branch Output 2 screen, refer to Branch Output 1.
Figure 7-15 Branch Output 1 (1)
PDU8000 Modular Precision PDC V2.0
User Manual 7 MDU Commissioning Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 80
To Next Page
Loading...
