Huawei PDU8000 - 1 User Manual Usage

1 User Manual Usage
This chapter describes the notes for using the precision modular PDC user manual.
● Before using this document, get familiar with the actual
conguration and
application scenario of the modular precision PDC.
● Before using this document, make available the documents delivered with
each component.
● User interfaces displayed in this document correspond to the monitor display
module (MDU) version V100R002C46SPC914 and are for reference only.
● Put on necessary protective equipment such as the safety helmet and gloves
before entering the site.
● Before performing an operation, ensure that the prerequisites are met.
Otherwise, the expected result may not be achieved. More seriously,
equipment damage and personal injury may occur.
● Before using this document, read through and keep in mind the safety
precautions and the cautions and notes for operations.
●
Conguration parameters are essential to the reliable running of a system.
Improper modications of parameters easily cause abnormal running status,
or even damage to the system.
● You are not allowed to modify
conguration parameters without permission
when using the modular precision PDC. If a modication is necessary, contact
Huawei technical support. Huawei shall not be responsible for any loss caused
by unauthorized
conguration modication.
● Operations marked as optional in the chapters, sections, or procedures can be
performed depending on the actual conguration and requirements of the
modular precision PDC.
PDU8000 Modular Precision PDC V2.0
User Manual 1 User Manual Usage
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 1