Table 3-4 Module function description
Module Function
MCCB input module Provides overload and short-circuit protection.
Collects currents.
Provides level C surge protection.
MCB output module Distributes power, and provides overload and short-
circuit protection.
3.6.3 Monitoring Module
The monitoring module is used to display and monitor electrical parameters. It
consists of the Monitor Display Unit (MDU), monitoring board, and signal cables.
There are two types of MDUs. Their BOM numbers are 02310PQR and 02312PCE.
Figure 3-15 MDU (02312PCE)
Figure 3-16 MDU (02310PQR)
PDU8000 Modular Precision PDC V2.0
User Manual 3 Overview
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 20
To Next Page
Loading...
