Step 10 (Optional) If more MCBs are added than necessary, tap the extra MCB and then
tap Delete.
Figure 8-26 Deleting an MCB
Step 11 After verifying that all added MCBs are correctly set, tap Save Settings.
Step 12 The MDU automatically restarts, and the capacity expansion setting is complete.
----End
8.6 Changing Alias
Procedure
Step 1 On the main screen, tap Operating Status to access the screen and query the
circuit breaker status of the mains and branches.
Step 2 Tap screen and change alias.
PDU8000 Modular Precision PDC V2.0
User Manual 8 Maintenance Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 139
To Next Page
Loading...
