Figure 8-23 Capacity expansion settings
Second method for setting capacity expansion: Turn on the MCB. The dialog box for setting
capacity expansion is displayed on the MDU. If you do not want to set capacity expansion,
cancel the displayed dialog box for setting capacity expansion for three consecutive times to
cancel capacity expansion settings.
Step 8 Tap Add to set the MCB quantity, phases, and capacity.
Figure 8-24 Adding an MCB
Step 9 (Optional) If an MCB is incorrectly set, tap the MCB and then tap Modify to
correct the phases and capacity.
Figure 8-25 Modifying MCB settings
PDU8000 Modular Precision PDC V2.0
User Manual 8 Maintenance Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 138
To Next Page
Loading...
