5.4.4 Connecting Cables
Cable Holes
Figure 5-27 Cable holes at the top
(1) Monitoring cable hole (2) Power cable inlet hole
(3) Power cable outlet hole
Figure 5-28 Cable holes at the bottom
(1) Cable holes at the bottom
Precautions
● Ensure that all circuit breakers, including upstream output circuit breakers, are
switched
o before connecting cables.
● OT terminals and DT terminals must be coated with a heat shrink tubing.
PDU8000 Modular Precision PDC V2.0
User Manual 5 Installation Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 53
To Next Page
Loading...
